Avalan 900 MHz Long Range Wireless Ethernet Kit, Indoor

Specifications

• Does not interfere with Wi-Fi networks.
• Highest Quality of Service (QoS) available - Synchronous
  point to point protocol enables extremely low data
  latency and jitter.
• 128bit encrypted payload protection provides secure
  data delivery.
• Simple plug and play - pre-configured as matched pairs
  with no user programming required.
• Operates in the 902-928MHz band and does not require
  an FCC license to operate or install.
• VLAN extensions supported.
• RF transmission rate: 1.54 Mb/s
• Throughput: 935 Kb/s
• Output power: +21dBm – (4 Watts EIRP with 15dBi antennae)
• Receive sensitivity: -100dBm at 10e-4 BER (-112dBm with 15dBi antennae)
• Latency: < 1ms – assuming a dedicated wireless link to client device.
• Voltage : 4.5 - 9 VDC
• Current consumption: RX 260 mA TX 350 mA
• Radio channels: 12 Non-overlapping
• Automatic frequency select: Yes – radio channel automatically selected and adaptively optimized
• Manual frequency mode: Yes
• Status LEDs: Power, RF Link, Ethernet Link, Traffic, RF RX, RF TX, 4/Channel and 6/Link Quality
• Error correction technique: Sub-block error detection and retransmission
• Adjacent-band rejection: 60dB - SAW receiver filter attenuates cellular and pager interference.
• Temperature range -40C to 70C
• Power over Ethernet: Compatible with common 5V splitters (Linksys WAPPOE)

Drivers & Manuals

Photos & Videos

Accessories

Comments & Reviews