Specifications
The EL-430PIXIM dome provides a number of technical improvements in picture quality for viewing areas of extreme dynamic lighting conditions. It is powered by Pixim's Ultra Dynamic Pixel system. This PIXIM technology overcomes an over-exposure problem against strong back-light situations. As each pixel acts as a camera, the picture taken by one pixel does not affect the picture quality captured by other pixels. Based on this technology, the EL430PIXIM delivers a very high quality, high resolution and very accurate picture.
|
Parameter |
EL430PIXIM
|
|
Image Sensor |
High performance 1/3" Pixim WDR digital imaging device |
|
Effective Pixels |
NTSC : 768(H)X494(V)
PAL : 752(H)X582(V) |
|
High Resolution |
High resolution of 540 TVL at Day / 560 TVL Night |
|
Signal Processing |
17-bit Digital Signal Processing (max) |
|
Transfer Format |
PSF (Pogressive with Segmented Frames) |
|
Video output |
1.0Vp-p Composite. 75 Ohms |
|
Min. Illumination |
0.3 Lux at F1.2 (DSS off)
0.03 Lux at F1.2 (DSS on) |
|
Shutter Speed |
AUTO:
1/60-1/100,000 sec (NTSC)
1/50-1/100,000 sec (PAL) |
|
Scanning System |
2:1 Interlace |
|
S/N Ratio |
50dB (AGC Off) |
|
Lens |
3.3-12mm Extra-Low Dispersion Glass Vari-focal Lens |
|
SNR |
Auto |
|
Gain Control |
Off, Low, Middle, High |
|
Backlight Compensation |
Off / On, adjustable Backlight Zone |
|
Sharpness |
Off, Low, Middle, High |
|
Digital slow shutter |
Off / 2x / 4x / 6x / 8x / 16x / 32x |
|
WDR |
Auto / Off / Low / Middle / High |
|
Privacy Masking |
On / Off (6 Programmable zones) |
|
Reversal |
NOR / MIR / VER / FLIP |
|
Protocol |
Pelco-D |
|
Power source |
Duo Power Input: AC24V / DC 12V |
|
Operating current |
200mA at 12VDC, 110mA at 24VAC |
|
Operating Temperature |
14F~122F (-10C ~+ 50C) |