Specifications
I. Parts List
Please check to be sure you received all the components included in your new Composite/S-Video to VGA Convertor package:
1.) Converter Switch
2.) AC Power Adapter (5V Output)
3.) 4ft Male-to-Male VGA cable
II. Features
1.) Video signal conversion: convert Composite Video and S-Video signal to high resolution DF (frequency doubling) VGA signal
2.) Input signal compatibility: Composite (BNC), S-VIDEO, VGA, and PAL/NTSC signal auto-detect.
3.) Output resolution: 800×600@60HZ, 800×600@75HZ, 1024×768@60HZ
4.) Picture freeze-frame
5.) Brightness, contrast, saturation, and hue adjustment
6.) Auto save function restores settings in case of accidental power failure
7.) On-screen menu function/prompts for all operations
III. Installation
1.) Plug one end of the 5V AC Adapter into the wall outlet, and the other end (barrel plug end) into the power receptacle on the back of the Converter Switch.
2.) Attach one end of the Male-to-Male VGA cable to the Video Out female VGA Connector on the Converter Switch, and plug the other end into your CRT or LDC monitor.
3.) Attach your video signal device (security camera, computer video card, DVD, etc.) to the correct female Video Input (BNC, VGA, or S-Video) on the Converter Switch.
4.) Turn your monitor on, and use the Input button on the Converter Switch to select the desired video input device (ensure each video device is properly powered on before searching for the input signal).
IV. Operation
Input Button - Facilitates toggling between video signal input (Composite, S-Video or VGA)
Menu Button - Facilitates toggling between brightness, contrast, saturation, and hue
1.) When BRI appears on screen, press "Freeze/+” to increase picture brightness; press "Resolution/-” to decrease picture brightness
2.) When CON appears on screen, press "Freeze/+” to increase picture contrast; press "Resolution/-” to decrease picture contrast
3.) When COL appears on screen, press "Freeze/+” to increase picture saturation; press "Resolution/-” to decrease picture saturation
4.) When HUE appears on screen, press "Freeze/+” to increase picture hue; press "Resolution/-” to decrease picture hue
Freeze/+ - When menu is off, press Freeze/+ to freeze the image; press again to restore picture
Resolution/- - When menu is off, press Resolution/+ to select resolution: 800×600@60HZ, 800×600@75HZ, 1024×768@60HZ
Input + Resolution/- Press the Input and Resolution/- at same time to restore the video converter to default settings
V. Default Settings
Note: Press the Input and Resolution/- at same time to restore the video converter to default settings
Signal input channel : Composite (BNC)
Output resolution············: 800×600 @60HZ
Brightness·······················: 32
Contrast ··························: 36
Color ······························: 36
Hue·································: 0
VI. Specifications
1. Rated for 5V/1A DC power.
2. Input video signal:
Supports Composite (BNC), S-Video and VGA; NTSC/PAL auto-detect.
Signal peak value: 1.5Vpp
Impedance: 75 Ohms
3. RGB signal peak value: 0.6VPP
Impedance: 75 Ohms
Field synchronizing signal peak value: 3VPP
Impedance: 75 Ohms
Line synchronizing signal peak value: 5VPP
Impedance: 75 Ohms
4. Single button operation: Press button down and hold for at least 5 seconds before release. Combination button operation: press down and hold Button 1, and then press Button 2; hold both buttons for at least 5 seconds before release.
